Bulldozer , Dozers , bull Dozers , the bulldozer
Products By Company
Komatsu
John Deere
Volvo
Hitachi
CAT
INGERSOLL-RAND
CASE
Dynapac
Schwing
JCB

Home Page


> Backhoe Loaders
>
Crawler-Carriers
>
Crushers
>
Dozers
>
Excavators
>
Graders
>
Ready Mix Concrete Trucks
> Road Rollers
>
Shovels
>
Skid-Steer-Loaders
> Trucks
> Wheel-Loaders
>
Large Asphalt compactor
>
Small Asphalt compactor
>
Large Soil compactor
> Small Soil compactor
> Large Pavers 
>
Commercial Pavers
>
Titan Pavers
> Pneumatic Rollers
>
Road Wideners/Transfer
>
Articulated Trucks
 

Dozers - John Deere Dozers - 750J

Earthmovers ---> Dozers Manufacturer Companies  --> John Deere Dozers  -->  750J



                                                                                                                            

Features :-  Komatsu Bull Dozers  -  750J

Productivity --> John Deere Dozers Model -> 750J

* Turbocharged/after-cooled 6-cylinder John Deere PowerTech™ wet-sleeve diesel provides exceptional reliability, power, and torque. 
* Full-featured hydrostatic drive train delivers full power turns, infinite speed range, infinitely variable track speeds, and automatic load sensing. 
* Total Machine Control lets you precisely match machine response and operating characteristics to operator preferences for increased flexibility and productivity. 
* Standard, LT, WT, and LGP configurations are available with inside-mount power-angle-tilt and outside-mount straight and semi-U blades. 
* Purpose-built mainframes for PAT and outside-mount blades allow optimized component placement for uncompromised grading ability. 

Comfort --> John Deere Dozers Model -> 750J

* Cab-forward design positions the operator close to the front for a more stable ride and unsurpassed visibility behind, below, and beyond the blade. 
* Deluxe suspension armchair adjusts seven ways for all-day comfort. Adjustable armrests and foot pedals are standard. 
* Ergonomically correct joystick gives intuitive, low-effort control of steering, forward/reverse travel, and ground speed. 
* Exclusive TMC lets you customize decelerator mode and response, forward/reverse ground speed ranges, steering modulation, FNR shift rate, and forward/reverse speed ratios. 

Uptime/Service --> John Deere Dozers Model -> 750J

* Best-in-class service access, same-side daily servicing, and 500-hour engine and 2,000-hour transmission and hydraulic oil and filter service intervals increase uptime. 
* Separate hydraulic and hydrostatic reservoirs, eliminating the possibility of cross contamination. 
* Fluid sample ports, remote drive system test ports, and onboard diagnostic messaging allow quick troubleshooting. 
* Hydraulic-driven fan automatically speeds up or slows down, operating as needed to keep things cool. Helps conserve power and fuel, while reducing noise and radiator core wear. 
* Operator station tilts a full 70 degrees in only minutes for wide-open access to internal components. 




Specifications  :-  Komatsu Bull Dozers  -  750J


MANUFACTURER John Deere
 
MODEL 750J
 
DATE OF SPECIFICATION May-07
 
ENGINE  
 
     Manufacturer/Model John Deere / 6068H
 
     Net Horsepower @ Rated rpm 145 (108) @ 2100
 
     # Cylinders and Displacement cu in. (L) 6 - 414 (6.8)
 
     Maximum Torque lb ft Not published
 
TRANSMISSION  
 
     Type Hydrostatic w/direct drive
 
     Speed Ranges Infinite
 
          Forward 6.3 (10.1)
 
          Reverse 6.3 (10.1)
 
FINAL DRIVES Double reduction w/ planetary
 
STEERING Dual-path HS w/ctr rotation
 
HYDRAULIC SYSTEM  
 
     Pump Type Piston
 
     Pump flow gpm (L/min.) 38 (144)
 
     System Pressure psi (kPa) 3625 (24980)
 
UNDERCARRIAGE  
 
     Track Gauge in.(mm) 74" (1880)
 
     Length of Track on Ground in. (mm) 102" (2590)
 
     Std. Grouser in. (mm) 22" (560)
 
     Ground Contact Area sq in. (cm²) 4,488 (28960)
 
     Ground Pressure psi (kPa) 7.24 (49.9)
 
     No. of Track Rollers 7
 
     Track Pitch in. (mm) 7.5" (190)
 
     Track Shoes each side 40
 
     Track Oscillation in. (mm) 8.6" (220)
 
DOZER  
 
     Blade Width in. (mm) 130" (3300)
 
     Blade Height in. (mm) 47" (1190)
 
     SAE Blade Capacity cu yd (m³) 4.23 (3.24)
 
     Blade Lift Height in. (mm) 38.5" (980)
 
     Digging Depth in. (mm) 24.4" (620)
 
     Blade width at Full Angle in. (mm) 118.9" (3020)
 
     Blade Tilt in. (mm) 17.2" (437)
 
DIMENSIONS  
 
     Height w/ROPS in. (mm) 124" (3150)
 
     Length w/Dozer in. (mm) 196.5" (4990)
 
     Ground Clearance in. (mm) 14" (356)
 
CAPACITIES  
 
     Fuel Tank gal (L) 98 (371)
 
     Hydraulic Reservoir gal (L) 28 (106.0)
 
SAE OPERATING WEIGHT LB (KG) 32,585 (14781)


 

Google