|
Features :- Komatsu Bull Dozers
- 950J
Productivity --> John Deere Dozers Model -> 950J
* Turbocharged/after-cooled 6-cylinder 10.5 L wet-sleeve Tier-3-certified diesel provides exceptional reliability, power, torque, and fuel efficiency.
* Full-featured hydrostatic drive train delivers full power turns, counter rotation, infinite speed range, infinitely variable track speeds, and automatic load sensing.
* Total Machine Control lets you precisely match machine response and operating characteristics to operator preferences for increased flexibility and productivity.
* Power management takes the guesswork out of efficient operation, automatically maintaining peak engine rpm and power efficiency without stalling or shifting.
Comfort --> John Deere Dozers Model -> 950J
* Wide expanse of glass provides unsurpassed forward visibility; seat is angled 15-degrees for enhanced rear visibility.
* Deluxe seat adjusts seven ways for all-day comfort. Adjustable armrests and foot pedals are standard.
* Ergonomically correct joystick gives intuitive, low-effort control of steering, forward/reverse travel, and ground speed.
* Pilot control and load-sensing hydraulics deliver fatigue-beating low-effort blade operation and predictable response, regardless of the load.
* Exclusive TMC lets you customize decelerator mode and response, forward/reverse ground speed ranges, FNR shift rate, and forward/reverse speed ratios.
Uptime/Service --> John Deere Dozers Model -> 950J
* Wide-open service access, same-side daily servicing, and 500-hour engine and 2,000-hour transmission and hydraulic oil and filter service intervals increase uptime.
* Remote drive system test ports, and onboard diagnostic messaging allow quick troubleshooting.
* Hydraulic-driven fans automatically speed up or slow down, operating as needed to keep things cool. Helps conserve power and fuel, while reducing noise and radiator core wear.
* Unique final-drive double seal serves as an early warning that helps avert major final-drive failure and expense.
* Operator station tilts in only minutes for wide-open access to internal components.
Specifications :- Komatsu
Bull Dozers
- 950J
| MANUFACTURER |
John
Deere |
| |
| MODEL |
950J |
| |
| DATE
OF SPECIFICATION |
Apr-07 |
| |
| ENGINE |
|
| |
| Manufacturer/Model |
Liebherr
/ D936 L A6 |
| |
| Net
Horsepower @ Rated rpm |
247
(184) @ 1600 |
| |
| #
Cylinders and Displacement cu in. (L) |
6 -
641 (10.5) |
| |
| Maximum
Torque lb ft |
Not
published |
| |
| TRANSMISSION |
|
| |
| Type |
Hydrostatic
w/direct drive |
| |
| Speed
Ranges |
Infinite |
| |
| Forward |
6.8
(10.9) |
| |
| Reverse |
6.8
(10.9) |
| |
| FINAL
DRIVES |
Double
reduction w/ planetary |
| |
| STEERING |
Dual-path
HS w/ctr rotation |
| |
| HYDRAULIC
SYSTEM |
|
| |
| Pump
Type |
Variable
axial-piston |
| |
| Pump
flow gpm (L/min.) |
68
(257) |
| |
| System
Pressure psi (kPa) |
3770
(25980) |
| |
| UNDERCARRIAGE |
|
| |
| Track
Gauge in.(mm) |
78"
(1980) |
| |
| Length
of Track on Ground in. (mm) |
118"
(3000) |
| |
| Std.
Grouser in. (mm) |
24"
(610) |
| |
| Ground
Contact Area sq in. (cm²) |
5,667
(36560) |
| |
| Ground
Pressure psi (kPa) |
10.1
(69.6) |
| |
| No.
of Track Rollers |
7 |
| |
| Track
Pitch in. (mm) |
8.5"
(220) |
| |
| Track
Shoes each side |
40 |
| |
| Track
Oscillation in. (mm) |
5.55"
(140) |
| |
| DOZER |
|
| |
| Blade
Width in. (mm) |
145"
(3680) |
| |
| Blade
Height in. (mm) |
61"
(1550) |
| |
| SAE
Blade Capacity cu yd (m³) |
9.4
(7.19) |
| |
| Blade
Lift Height in. (mm) |
48"
(1220) |
| |
| Digging
Depth in. (mm) |
20"
(508) |
| |
| Blade
width at Full Angle in. (mm) |
145"
(3680) |
| |
| Blade
Tilt in. (mm) |
37"
(940) |
| |
| DIMENSIONS |
|
| |
| Height
w/ROPS in. (mm) |
135"
(3430) |
| |
| Length
w/Dozer in. (mm) |
238"
(6050) |
| |
| Ground
Clearance in. (mm) |
21"
(533) |
| |
| CAPACITIES |
|
| |
| Fuel
Tank gal (L) |
141
(534) |
| |
| Hydraulic
Reservoir gal (L) |
50
(189.3) |
| |
| SAE
OPERATING WEIGHT LB (KG) |
56,361
(25565) |
|