excavators -> CAT excavator -> CAT mini excavator  -> CAT small excavator  -> CAT medium excavator -> CAT large excavator  -> Demolition excavator

 
 

Excavators - CAT Large Excavators - 345C L Hydraulic

Google


                                                                                                         

CAT Large Excavators

 345C L Hydraulic Excavator

The 345C offers outstanding performance, excellent control, high stick and bucket forces, impressive lift capacity, simplified service and a more comfortable operator station to increase your productivity and lower operating costs.


 345C L STANDARD EQUIPMENT 

Mirrors, frame and cab

Auto-lube ready

Travel alarm

Swing parking brake, automatic

Auxiliary hydraulic valve and auxiliary pump drive location

Cab

Air conditioner, heater, defroster with automatic climate control

Ashtray with lighter

Coat hook

Floor mat

Light, interior

Literature compartment

Positive filtered ventilation

Seat belt, retractable

Seat, suspension, with high back and head rest

Skylight, openable, with sunshade

Storage compartment suitable for a lunch box cooler

Windshield wiper and washer (upper and lower)

Bolt-on FOGS capability

Polycarbonate side windows

Radio mounting (DIN size)

Sunscreen

Radio, AM/FM with two speakers

Counterweight (7611 kg, 16,780 lbs)

Fuel-Water separator

Hydraulic neutralizer lever for all controls

Lights, working

Cab mounted, two

Frame mounted

Boom, both sides

Engine

Cat C13 with ACERT™ Technology

Precleaner

Speed control, automatic

Fine swing control

Heavy lift mode

Monitor, full graphic color display

Product Link ready

S·O·SSM analysis, engine and hydraulic sampling ports

Start-up level checks (engine oil & coolant, hydraulic oil)

Track

Guiding guards, idler and center sections

900 mm (36") triple grouser shoes

Grease lubricated



 345C L OPTIONAL EQUIPMENT 

Coupler

Pin grabber type, controls, lines

Engine

Cold weather starting aid (ether aid, heavy-duty batteries and jump receptacle)

Machine Security System (MSS)

Counterweight

Counterweight 8110 kg (17,880 lb)

Counterweight 9013 kg (19,870 lb)

Counterweight removal device for 7611 kg (16,780 lb) and 8810 kg (17,880 lb) counterweight

Hand Control Pattern Changer

Guards

Guiding, full length

Heavy-duty, under house

Vandalism protection

Swivel guard

Front window

Falling Object, for cab

Guiding, sprocket end

Auxiliary controls

Hammer (One-way), thumb (two-way), combined (Tool Control)

Auxiliary hydraulic lines for Reach Booms and Sticks

Auxiliary hydraulic valve and pump attachments

Straight travel pedal

Sticks

3.9 m (12'10") LR/R/SA

4.3 m (14'1") LR/R/SA

2.5 m (8'2") M

2.9 m (9'6") R/SA

3.35 m (11') R/SA

3.0 m (9'10") M

Track

750 mm (30") triple-grouser shoes

750 mm (30") double-grouser shoes

900 mm (36") double-grouser shoes

600 mm (24") double-grouser shoes

750 mm (30") single-grouser shoes

Booms

Reach 6.9 m (22'8")

Long Reach 7.4 m (24'3")

Mass excavation 6.55 m (21'6")

Reach, Special Application 6.9 m (22'8")

Buckets (see pages 12, 22, 23 and 24)

Bucket linkage:

UB family

TB family (with lift eye)

Bucket sidecutters and tips

Bucket pin adapter kit, for using 345B series buckets

Check valves

Boom lowering

Stick lowering

Cab

Rear window emergency exit

Power supply, 12V - 10A (2)

Undercarriage

Fixed

Variable

Wide variable






 FEATURES & BENEFITS

Top-Mounted Rotator
All S300 shear models are equipped with 360° rotators of a proven design (identical to those on Cat Multi-Processors.) These rugged rotation systems ensure quick and precise placement of the jaws in optimum cutting position without requiring movement of the excavator.

Extremely Efficient
S300 shears have a very high force-to-weight ratio, compared with most competitive shears. Jaw openings of the shears are matched to the high shear force, greatly enhancing shear power, cycle time and reducing overall system cost.

Stick or Boom Mount
Shears can be mounted on either the boom or stick of the excavator. Boom-mounted shears are preferred in scrap-processing applications; while demolition applications typically call for the greater reach of a stick-mounted shear



Versatility
With versatile attachment using a Pin Grabber Coupler or Pin-On configuration, the Contractors' Grapples are the ideal choice for structural demolition and material handling.

Better Productivity
Contractors' Grapples easily handle small and large debris, interlocking to effectively retain material while sorting or loading.

Heavy Duty Wear Material
Tips, wrappers and wear strips are made of AR400 steel, for durability in the harshest conditions. Box-type construction provides rigidity without unnecessary weight.



Pin-On or Coupler
Available in both pin-on and quick coupler models.

Heavy Construction
Reinforced, one piece shank is made of Hardox 400. Includes adjuster group and Cat GET




High-Strength Steel
90,000+ psi steel is used in the wrapper, sideplate, sidebar, and hinge. Wear strips, wear plates, and cutting edge use 135,000+ psi abrasion-resistant, high-strength steel.

Large Capacity
Large tip radius optimizes bucket capacity for easy to penetrate soils.

Bottom Wear Strips
Bottom wear strips provide replaceable wear material for worn areas.

Straight Sides
Straight sides dump quickly with less tendency to pack material at the back of the bucket.

Angled Side Bars
Side bars facilitate material handling, especially pipes and poles, and when working with a thumb.

Adjuster Group
All Caterpillar buckets come with an adjuster group to eliminate slack.

Pre-drilled sidebars
Sidebars are pre-drilled for optional sidecutters



High-Strength Steel
90,000+ psi steel is used in the wrapper, sideplate, sidebar, and hinge. Wear strips, wear plates, and cutting edge use 135,000+ psi abrasion-resistant, high-strength steel.

Designed For Extreme Duty
Rock Buckets have the thickest wear plates available for extended life in severe applications. The side wear plates extend further up the side and the bottom wear strips extend past the bucket wrapper for maximum protection.

Tight Tip Radius
The Heavy Duty Rock bucket has a tighter tip radius than the General Purpose Bucket (same tip radius as the standard Heavy Duty Bucket). This tighter tip radius allows for greater breakout force and better penetration.

Thicker Base Edges and Oversized GET
These buckets utilize thicker base edges and larger GET than the standard General Purpose buckets for enhanced durability and performance.

Adjuster Group
Adjuster group is included on all styles.

Pre-Drilled Sidebars
Buckets are pre-drilled for optional sidecutters and sidebar protectors.

Angled Side Bars


Straight Sides




Flexible, Powerful Demolition Tool
The Multi-Processor features a large-diameter, cross-mounted cylinder providing exceptional cutting and crushing force and an excellent power-to-weight ratio. Any MP unit can accept multiple jaw sets for maximum on-the-job flexibility.

Replaceable Teeth & Knives
Equipped with replaceable concrete crusher teeth and reversible steel cutting knives.

360 Degree Rotation
The Multi-Processor features hydraulic 360 degree rotation; the unit can attack material to be demolished from virtually any angle, minimizing the need to move the base carrier.

Precision Demolition
The Multi-Processor with Concrete Cutter jaws puts maximum demolition force precisely where it's needed, for fast efficient demolition work.

Cuts Steel
Integral steel-cutting knives slice through rebar and pipe, eliminating the need for torching




Recycle Concrete
Recycles demolished concrete by pulverizing concrete, separating concrete and rebar, and cutting rebar as needed.

Powerful, Flexible Demolition Tool
The Multi-Processor features a large-diameter, cross-mounted cylinder providing exceptional cutting and crushing force and an excellent power-to-weight ratio. Any MP unit can accept multiple jaw sets for maximum on-the-job flexibility.

360 Degree Rotation
The Multi-Processor features hydraulic 360 degree rotation; the unit can attack material to be demolished from virtually any angle, minimizing the need to move the base carrier




Steel Demolition
High-strength reversible knives make the Shear jaw set the perfect choice for demolishing steel structures and reducing steel scrap.

Flexible, Powerful Demolition Tools
The Multi-Processor features a large-diameter, cross-mounted cylinder providing exceptional cutting and crushing force and an excellent power-to-weight ratio. Any MP unit can accept multiple jaw sets for maximum on-the-job flexibility.

360 Degree Rotation
The Multi-Processor features hydraulic 360 degree rotation; the unit can attack material to be demolished from virtually any angle, minimizing the need to move the base carrier.


Flexible, Powerful Demolition Tools
The Multi-Processor features a large-diameter, cross-mounted cylinder providing exceptional cutting and crushing force and an excellent power-to-weight ratio. Any MP unit can accept multiple jaw sets for maximum on-the-job flexibility.

360 Degree Rotation
The Multi-Processor features hydraulic 360 degree rotation; the unit can attack material to be demolished from virtually any angle, minimizing the need to move the base carrier.

Steel Plate Processing
Quickly cuts steel plate on barges, railway cars, grain, water, oil and fuel tanks.

MP20 Only
Only available for the MP20 Multi-Processor body.

Dual Knives
Dual knives on the moving and static jaws produce smooth, straight edges.

Reversible Knives
All knives are reversible for easy maintenance



Maximum Versatility
The Pin Grabber Plus Quick Coupler allows machine operators to change work tools in seconds without ever leaving the cab.

Competitive Bucket Advantage
Quick coupler design can engage buckets from Caterpillar and many other manufacturers such as Daewoo, JCB, Kobelco and Hitachi.

Engage Virtually Any Tool
Pin grabbing design allows the Coupler to pick up nearly anything equipped with standard bucket pins without requiring modifications.

Integral Lifting Eye
An integral lifting eye can be used for lifting material without a bucket attached, increasing the maximum lifting capability of the excavator.

Reverse Bucket Mode
The Pin Grabber Coupler can engage standard buckets in a reverse direction for front shovel and trenching tasks.

Mechanical Locking Bar
Integral mechanical locking bar automatically engages behind hydraulic wedge for positive tool retention

 

 

 
© HRRoadlines.com 2006 Disclaimer: Brands, product names, and website addresses herein are trademarks or registered trademarks of their respective owners.