|
|
|
|
|
Pavers
Earthmovers ---> Pavers Manufacturer Companies --> Dynapac
Wheeled Pavers
Earthmovers ---> Dynapac wheeled Pavers Model --> F6W
Earthmovers --->
Dynapac wheeled Pavers Model --> F8W
Earthmovers ---> Dynapac
wheeled Pavers Model --> F9W
Earthmovers ---> Dynapac
wheeled Pavers Model --> F121W
Earthmovers ---> Dynapac wheeled Pavers Model --> F161W
Tracked Pavers
Earthmovers ---> Dynapac Tracked Paver Model -->
F4C
Earthmovers ---> Dynapac
Tracked Paver Model --> F5C
Earthmovers ---> Dynapac
Tracked Paver Model --> F5CS
Earthmovers ---> Dynapac
Tracked Paver Model --> F6C
Earthmovers ---> Dynapac
Tracked Paver Model --> F8C
Earthmovers ---> Dynapac
Tracked Paver Model --> F121C
Earthmovers ---> Dynapac
Tracked Paver Model --> F141C
Earthmovers ---> Dynapac
Tracked Paver Model --> F141CR
Earthmovers ---> Dynapac
Tracked Paver Model --> F150C
Earthmovers ---> Dynapac
Tracked Paver Model --> F181C
Earthmovers ---> Dynapac
Tracked Paver Model --> F182CS
Earthmovers ---> Dynapac
Tracked Paver Model --> F300CS
Mobile Feeders
Earthmovers ---> Dynapac Mobile Feeders Model --> MF250
Earthmovers ---> Dynapac
Mobile Feeders Model --> MF300C
Screeds
Earthmovers ---> Dynapac Screeds Model --> VB125V/TV (1,20-3,10 m)
Earthmovers ---> Dynapac
Screeds Model --> VB340V/TV (1,70-4,40 m)
Earthmovers ---> Dynapac
Screeds Model --> VB450TV (2,00-5,50 m)
Earthmovers ---> Dynapac
Screeds Model --> VB460TV (2,30-6,10 m)
Earthmovers ---> Dynapac
Screeds Model --> VB805TV (2,50-8,00 m)
Earthmovers ---> Dynapac
Screeds Model --> VB850V/TV (2,50-8,50 m)
Earthmovers ---> Dynapac
Screeds Model --> VB1105TV (3,00-9,00 m)
Earthmovers ---> Dynapac
Screeds Model --> SB1250TV (3,00-16,00 m)
Wheeled Pavers
Our wheeled pavers are well known for their reliability over many years of operation with a wide range of applications. In combination with
their flexibility these machines are the ideal choice for paving urban roads. In response to the needs of end users and the construction
industry a wide range of optional equipment is available which further enhances their versatility.
Earthmovers ---> Dynapac wheeled Pavers Model --> F6W
Designed as a versatiled wheeled paver, the F6-4W with four wheel drive and integrated anti-spin system performes an important factor of the
F6-family. This paver is ideally suitable for laying bituminous mixes, rolled or lean-mix concrete, ballast and loose mineral mixes for
set-paved substrates. The Dynapac F6W is intended for a wide spectrum of uses requiring exceptional mobility and placement quality – such as
new roads, resurfacing, maintaining and repairing secondary and rural roads, narrow streets and alleys, car parks and areas of large open-plan
building sites.
Earthmovers ---> Dynapac wheeled Pavers Model --> F8W
Dynapac's F8W is a compact three-axle wheeled paver. Equipped with a powerful engine and large rear tires for a superb traction the paver is
capable of paving up to 5,00 m in width. The F8W is intendend for a broad spectrum of uses that demand high mobility and placement quality. The
small turning radius allows an smooth paving in narrows streets.
Earthmovers ---> Dynapac wheeled Pavers Model --> F9W
This machine is equipped with the same proven technology and made to the same quality standards as the large and medium-sized finishers.
Designed as a three-axle wheel-type machine, it can be used to place bituminous mixes, rolled or lean-mix concrete, ballast and loose material
mixes for set-paved substrates.
The F9-6W is intended for a broad spectrum of uses that demand exceptional mobility and placement quality. Such as new roads, resurfacing
purposes, maintaining and repairing secondary and rural roads, narrow streets and alleys, parking lots and the floor of large open-plan
buildings.
Earthmovers ---> Dynapac wheeled Pavers Model --> F121W
The highly manoeuverable F121W of Dynapac’s wheeled paver range is the smaller one of the 2,5 m basic width range. Available with a six wheel
drive and standard anti slip system this machine can cope with working widths of max. 7,25m. Besides the conventional drive system Dynapac
offers the F121W with a hydraulic direct drive and a two speed planetary gearbox with hydraulically operated differential lock.
Earthmovers ---> Dynapac wheeled Pavers Model --> F161W
The F161-8W is the biggest machine type of the Dynapac wheeled paver range. This paver convinces by its high traction force created by the
optional 8-wheel drive together with the standard differential lock and the anti slip system for the hydraulically driven front wheels. With a
maximum working width of 8,2 m and a hopper size of 5,3 m³ combined with a transport speed of
16,5 km/h the F161W is the flexible solution for laying country roads or highways.
Tracked Pavers
The tracked pavers in the Dynapac range sets impressive standards, since these pavers are convincing at all kind of paving widths by their ease
of adapting, simple use and servicability. Long track drives and wide pads guarantee for maximum traction and low maintenance due to their
sealed and lifetime lubrication. The rugged track types of these pavers compensate uneven ground level and a precise electronical steering
ensures excellent laying results.
Earthmovers ---> Dynapac Tracked Paver Model --> F4C
The Dynapac small paver range is especially designed for applications which require a machine with a low working width of less than 1,20 m. So
these pavers are ideally suitable for job sites like cycle-tracks, side walks, pavement-extensions, car-parks, sport-fields and close car-park
buildings. A lot of additional equipment like cut off shoes or covers for one conveyor half - available as options - ensure an economical use
of the Dynapac paver F4C at different applications. Even a minimum working width of 300 - 600 mm is possible.
Earthmovers ---> Dynapac Tracked Paver Model --> F5C
The Dynapac small paver range is especially designed for applications which require a machine with a low working width of less than 1,20 m. So
these pavers are ideally suitable for job sites like cycle-tracks, side walks, pavement-extensions, car-parks, sport-fields and close car-park
buildings. A lot of additional equipment like cut off shoes or covers for one conveyor half - available as options - ensure an economical use
of the Dynapac paver F5C at different applications. Even a minimum working width of 300 - 600 mm is possible.
Earthmovers ---> Dynapac Tracked Paver Model --> F5CS
Customer´s demand for electrical screed heating especially for small pavers lead to the development of the new tracked F5CS paver. Together
with the parallely designed new screed type VB125TV-E with electrical heating the F5CS performs working widths up to even 3,10 m. With its very
good balanced weight distribution, long tracks, high traction forces and rugged carriage the Dynapac F5CS is intended to be used mainly at high
working widths and for paving with electrical screed heating.
Earthmovers ---> Dynapac Tracked Paver Model --> F6C
Customer´s demand for a tracked version of Dynapac´s well known F6W lead to the development of the new tracked F6C. Together with the new
designed screed type VB340TV-E with electrical heating the F6C performes working widths up to even 4,40 m. With its long tracks, high traction
forces and rugged carriage the Dynapac F6C is intended to be used mainly on loose ground or at high working widths. Due to Dynapac´s life time
greasing the track drive is maintenance free.
Earthmovers ---> Dynapac Tracked Paver Model --> F8C
The Dynapac F8C with its maximum working width of 6,10 m represents the link between the compact F6C and the F121C . The rubber pad track
types are responsible for high traction, straight drive and excellent levelling of the machine. The compact dimensions of the F8C together with
standard features like the slidable dashboard and foldable push rollers make this paver suitable for confined jobsites as well as for paving
big parking areas or country roads.
Earthmovers ---> Dynapac Tracked Paver Model --> F121C
The F121C is Dynapac’s smallest tracked paver in the
2,5 m basic width range. Although it is truly a big paver, the F121C is offering the advantages of its class. This paver lends itself ideally
for medium paving widths.
Earthmovers ---> Dynapac Tracked Paver Model --> F141C
The F141C is the most popular Dynapac paver of its class. Equipped with long track drives and a powerful engine this paver is suitable for a
large field of applications. The customer can choose between a wide range of options to get a machine which fits perfectly it’s specific
propose.
Earthmovers ---> Dynapac Tracked Paver Model --> F141CR
With the F141CR rubber track paver, Dynapac is offering an intelligent solution for modern street construction. This system ideally combines
the advantages of standard crawler unit and those of a wheel type paver. It offers good traction, a small turning circle and impressive
flexibility and mobility, positive factors in a range of applications. The rubber tracks are connected to two-stage planetary gearboxes
permitting a transport speed of up to 17 km/h (10,5 mph). The track rollers are independently suspended, which ensures compensation of surface
unevenness and guarantees smooth movement. Long life lubrication of the whole crawler unit reflects Dynapac’s commitment to quality.
Earthmovers ---> Dynapac Tracked Paver Model --> F150C
The Dynapac F150C paver finisher with integrated emulsion spray system is the result of a high tech development showing new perspectives of
asphalt road construction. The actual working method of the finisher as well as all substantial performance parameters is that of a standard
paver. Based on this well proven technology of the F-type pavers, the F150C is additionally equipped with a tack coating spray bar, located on
the front of the machine, which is far more economical and reliable compared to conventional methods.The hydraulic extension/retraction of the
spray bar is independent from the screed. To spray emulsion, the F150C is fitted with an integrated emulsion tank, with a capacity of approx.
2.800 l.
Earthmovers ---> Dynapac Tracked Paver Model --> F181C
The F181C is a strong, well-balanced paver. Equipped with a powerful but economical engine and extra-long track drives the machine is capable
of paving with great widths in demanding situations.
Earthmovers ---> Dynapac Tracked Paver Model --> F182CS
With the F182CS Dynapac offers an asphalt paver for working widths up to 13,50 m. The extra-long track drives are capable to transfer of high
traction forces onto loose ground. Therefore, this paver is ideally for new road projects.
Earthmovers ---> Dynapac Tracked Paver Model --> F300CS
The high performance finisher F300CS with a standard paving width of 3,0 m is the biggest machine of the tracked paver range. Equipped with a
track length of more than 3,5 m , a hopper capacity of 15 t and an auger diameter of 500 mm this machine is developed to cope with maximum
working widths of up to 16,0 m. Together with the user friendly Dynapac PLC-System (Programmable Logic Control), which controls all paver
functions in relation to the paving requirements this machine is the ideal equipment for paving highways or motorways.
Mobile Feeders
Mobile feeders are a transport and conveying system which is used as a non-contact connecting element between road finishing machines and
transport vehicles carrying mixed goods. A hopper for mixed goods is used for storing the material, which is transported on a heat-resistant
rubber type band to a sensor controlled, automatically height adjusted conveyor at the front end of the feeder.
Earthmovers ---> Dynapac Mobile Feeders Model --> MF250
The MF250 is a transport and conveying system which is used as a non contact connecting element between road finishing machines and transport vehicles for carrying mixed goods. A hopper for mixed goods is used for storing the material. The hopper wings of this container can be folded up for better emptying and for even distribution of mixed goods. The mix is transported on a heat-resistant rubber type band conveyor, which leads the material to a sensor controlled, automatically height adjusted conveyor belt at the front end of the feeder.
Earthmovers ---> Dynapac Mobile Feeders Model --> MF300C
The tracked MF 300C is a transport and conveying system which is used as a non contact connecting element between road finishing machines and transport vehicles for carrying mixed goods. This completely equipped machine has mainly been developed for use in the Compact Asphalt System and is also suitable to feed big pavers working at max. paving width. The automatically controlled conveyor can be lifted to a height of up to 5,0 m and the standard hopper size of 8,0 m³ can be enlarged to 45 t by use of a hopper insert. For an optimised view to the paver and the lorry the operator´s station can be lifted by appr. 1,0 m and the seats on both sides can be moved outwards.
Screeds
Many years of practical experience in the construction industry together with continuing development provide the basis for the advanced
technology and high stability of Dynapac screeds. The end result is an impressively high paving performance, including the achievement of
excellent compaction values. The rugged construction of the Dynapac screeds ensures a high degree of stability essential for paving widths of
up to 16 m with a fixed screed and up to 9 m with the telescopic one.
Earthmovers ---> Dynapac Screeds Model --> VB125V/TV (1,20-3,10 m)
Gas heated version with electric ignition, temperature and flame control. Extendable to 3,10 m by use of mechanically extension parts and hydraulically extendable from 1,20 m to 2,40 m.
Earthmovers ---> Dynapac Screeds Model --> VB340V/TV (1,70-4,40 m)
This screed type with a basic width of 1,70 m has been developed for use on the wheeled and tracked F6 paver range. The VB 340T(V) is infinitely variable extendable to 3,40 m, the maximum working width of 4,40 m (on F6C ) can be achieved by use of extension parts. Besides the standard gas heated version with electric ignition, temperature and flame control the screed is also available with the very user – and environment friendly electrical heating.
Earthmovers ---> Dynapac Screeds Model --> VB450TV (2,00-5,50 m)
The VB450TV, mainly used on the wheeled and tracked F8/F9 paver range has a basic width of 2,0 m and can be hydraulically extended to 3,75 m. The screed is equipped with an on-screed heat adjustment device located in a lockable remote control box. Equipped with electrical ignition, temperature and flame control, as an option the roof profile can be adjusted electro hydraulically in an infinitely variable way. The working width of the VB450TV can be increased to max. 5,50 m by use of mechanical extension parts.
Earthmovers ---> Dynapac Screeds Model --> VB460TV (2,30-6,10 m)
Developed as a screed for the wheeled paver type
F9-6W and the tracked paver F8C this screed has a basic width of 2,30 m and can be hydraulically extended to 4,60 m. Used with flame and temperature controlled LPG-heating the VB460TV can be used for working widths up to 6,10 m resp. 5,30 m by attaching extension parts of either 750 mm or 350 mm width. To minimize service and maintenance time and to increase durability of the screed Dynapac offers a central greasing device from a long list of very useful options like reduction shoes, bevel edges or the hydraulically operated roof profile adjustment.
Earthmovers ---> Dynapac Screeds Model --> VB805TV (2,50-8,00 m)
The high degree of stability of the rugged VB805TV is achieved by the advanced control system for the hydraulically extendable sub- assemblies, where main screed, torsion housing and telescoping components are interconnected via guide tubes. Telescoping components are individually controlled, the screed width is infinitely variable by use of telescopic cylinders. A salient feature of the screed design are the guide tubes, which just extend to 50% of their maximum travel even when the screed is fully extended (double the standard width). This ensures exceptional stability over the entire width of the screed.
The VB805TV is also available as Plus-version with an additional vibratory compaction unit driven by the vibrator shaft of the main screed. The increase in compaction by Plus - effect is achieved with an infinitely variable pressure (between 0 and 10 bar) applied hydraulically to the compaction unit.
Earthmovers ---> Dynapac Screeds Model --> VB850V/TV (2,50-8,50 m)
The well proven Dynapac Tamper-Vario screed
VB850T(V) achieves optimum compaction under varying paving conditions and materials. At the centre of the main screed the tamper bars are specifically shaped allowing them to operate in close proximity to each other and prevent marking in this area of the mat. To suit varying paving conditions and mix designs the tamper frequency can be adjusted infinitely variable by a potentiometer. An important factor contributing to the stability of the VB850T(V) are the twin telescopic guide tubes when the screed is fully extended. Together with the guide rails located in the screed main frame this special design reduces tortional and lateral movement within the screed to a minimum, ensuring a level pavement surface.
Earthmovers ---> Dynapac Screeds Model --> VB1105TV (3,00-9,00 m)
The well proven Dynapac Tamper-Vario screed
VB850T(V) achieves optimum compaction under varying paving conditions and materials. At the centre of the main screed the tamper bars are specifically shaped allowing them to operate in close proximity to each other and prevent marking in this area of the mat. To suit varying paving conditions and mix designs the tamper frequency can be adjusted infinitely variable by a potentiometer. An important factor contributing to the stability of the VB850T(V) are the twin telescopic guide tubes when the screed is fully extended. Together with the guide rails located in the screed main frame this special design reduces tortional and lateral movement within the screed to a minimum, ensuring a level pavement surface.
Earthmovers ---> Dynapac Screeds Model --> SB1250TV (3,00-16,00 m)
The well proven Dynapac Tamper-Vario screed
VB850T(V) achieves optimum compaction under varying paving conditions and materials. At the centre of the main screed the tamper bars are specifically shaped allowing them to operate in close proximity to each other and prevent marking in this area of the mat. To suit varying paving conditions and mix designs the tamper frequency can be adjusted infinitely variable by a potentiometer. An important factor contributing to the stability of the VB850T(V) are the twin telescopic guide tubes when the screed is fully extended. Together with the guide rails located in the screed main frame this special design reduces tortional and lateral movement within the screed to a minimum, ensuring a level pavement surface.
|
|
|
|
|
|
|
